Counter Surveillance Monitor
Microwave Down Converter 3GHz - 21GHz
Hidden Camera Locator DLU-02
RF Meter Detectors 
Counterfeit Money Detector
Counterfeit Detector Pen
Boomerang Non-linear Junction Detector
Telephone Encryption System
TL-2003 Univeral Transmitter Locator
Body Mic Busters
Mini Bug Detector
Digital Line Guard

Antennas  

9-Element Yagi Antenna
Dipol Wand Antenna
Dual Dipole Wand Antenna
Dual Element Spherical Loop Antenna
Helical Coil Wand Set
AC Line Antenna Adapter

Features

• OSCOR PC Software for enhanced spectrum analysis, storing signal and trace databases, and spectrum comparisons including RF mapping, provides the capability for permanent profiles of sweep environments and the ability to generate reports and graphs.
• Automatic Threat Correlation. The patented OSCOR correlator provides signal classification by correlating the demodulated audio of a received signal to the ambient noises of an environment.
• Automatic Signal and Trace Scanning and Logging. Only the OSCOR provides an automatic solution to rapidly logging and classifying all the signals of your environment. A quick reference guide provides a single chart that completely defines the programming process.
• Built-in automatically switched antenna array. Foldout antenna panel automatically selects the proper antenna with no connections required. Pre-amp provides maximum sensitivity for the proper input. No un-reliable cable connections or mismatched antenna inputs.
• Sonic ranging and triangulation to pinpoint bug locations. Using the Patented Threat Locating System, a bugging device can be readily found with no destructive searches. The Triangulate and Locate option uses sonic ranging to locate a threatening microphone.
• The OSCOR provides detailed signal analysis capabilities with a complete built-in suite of audio demodulators and IF bandwidth selections. The audio demodulators include FM wideband, FM narrowband, AM wideband, AM narrowband, Sub-carrier, Single Sideband, and IF bandwidths 250 kHz, 15 kHz, and 6 kHz.
• Built-in video monitors display images received on transmitted signals for protection against covert video transmitters. Supported video formats include NTSC, PAL, and SECAM. This feature is not included in the basic unit.
• Built-in printer for hard-copy printouts. The OSCOR built-in thermal printer provides a user with the ability to generate printouts of important sweep data.
• Removable Program chip for ease of upgrading software. When a new OSCOR upgrade comes out, simply contact REI to request a new program key.
• PC Interface and Remote Control of the OSCOR. The OSCOR PC interface software provides the capability to create permanent database profiles of sweep environments, generate professional reports and graphs.
• OIF & OBB - Optional IF interface and Base Band:
  The OIF interface provides an external RF port with output from the 10.7MH Intermediate Frequency in the OSCOR. Using the OIF port, a signal can be fed from the OSCOR into other types of test equipment to further analyze the signal (i.e. an external spectrum analyzer that may have digital demodulation capabilities, an oscilloscope for further time-domain analysis, or into an analog CRT type display. The Base Band interface provides an additional RF port taking the signal directly out of the demodulation circuit, with 250hKz bandwidth and can be used to feed a signal into an oscilloscope to perform FFT analysis to look for sub-carrier type signals (the OSCOR provides some sub-carrier capabilities, but this function provides better capabilities).

Advantages

OPC Software now included, providing the ability for enhanced spectrum analysis including the ability to store, retrieve, analyze, and compare signals and traces for quick detection of the most sophisticated eavesdropping transmitters. The software also provides the capability to remote control of an OSCOR across a network or VPN for remote monitoring purposes.

Portable complete package of countersurveillance test equipment. Complete unit is the size of a large brief case and can be easily carried on a plane, bus, or car as hand-carry luggage.

Programmable Automatic Mode that continuously scans all bands and silently detects eavesdropping devices. The OSCOR can be used around the clock to monitor an environment without an operator present.

High Sensitivity Digital Synthesized Receiver scans Radio Frequency (10KHz to 3GHz),(3-21GHz by using the MDC-2100 down converter), carrier current (10KHz to 5 MHz) including and infrared (850nm to 1070nm / 10KHz to 5 MHz).

Built-in Demodulators and Bandwidths: Demodulators include AM, FM, SSB, Sub-carrier, and video(available as an option). IF bandwidths are built-in and programmable and include 6Khz, 15KHz, and 250Khz.

Antenna Array: All OSCOR input antenna's are built into the case and are automatically switched.

Acoustic Correlator utilizes passive sound pattern matching to automatically detect and classify a listening device even when the OSCOR is running automatically (un-manned).

Strip Chart Plotter built-in the OSCOR to provide hard-copies of spectrum profiles, signal database information, correlation printouts, etc.. Printer functions as WYSIWYG(What You See Is What You Get) operation by printing any information that is displayed on the screen.

Video Receive and Display Capability. Optional feature provides ability to receive NTSC, PAL, and SECAM video formats to provide detection of transmitted video signals including covert chip cameras that are increasingly proliferated.

Triangulation and Location System*. Patented system that allows the user to pin-point the location of an eavesdropping device without the need for destructive and time consuming searches.
*New optional Capabilities.

Specifications

With the new Microwave Down Converter the OSCOR Counter Surveillance Monitor has the ability to search for illegal surveillance devices from 10KHz to 21GHz

Features

• Provides complete view of frequency spectrum from 3 to 21 GHz using the OSCOR display.
  Direct frequency control and band selection with OSCOR user interface.
  Integrated High Gain Log Periodic Antennas.
  Tripod provides stability to securely point downconverter MDC antennas.

Specifications

• Frequency Range: 3-21GHz
• Conversion Output Frequency: 5MHz to 3005MHz
• Modes of Operation and Frequency Ranges:
     Band 1: 3-9GHz
     Band 2: 9-15GHz
     Band 3: 15-21GHz
     All Band: 3-21GHz
• Antenna Gain:
     Band 1: 6.1dB
     Band 2: 5.3dB
     Band 3: 8.4dB
• MDS – Minimum Detectable Signal includes receiver sensitivity, antenna gain, and filtering losses:
     Band 1: -122.1 dBm
     Band 2: -122.3 dBm
     Band 3: -124.4 dBm
• Input Power: 200 milliamps at 12 volts
• Weight: 1.1 lb. (.5 Kg)
• Dim: 11.4 in. (29 cm) x 3.1 in. (8 cm) x 1.4 in (3.5 cm)
• Tripod:
• Weight: .77 lb. (.35 Kg)
• Dim: 8.75 in. (22.2 cm) x 2.5 in. (6.4 cm) x 1.5 in. (3.8 cm)
• Usage Height: 5.5 in. (14 cm

The new DLU-02 is a lightweight, battery-powered device that allows the user to quickly identify and locate hidden cameras, including spy/pinhole cameras, CCTV cameras, camcorders and auto focus cameras. The DLU-02 provides the operator with a choice of LED colors and operational modes. Two LED wavelengths are user selectable via a toggle button on the unit. The DLU-02 is designed for optimum performance over a range from 3 - 33 feet (1-10 meters). It is primarely intended for use indoors. The unit can be used beyond 10 meters and in outdoor situations, but performance will be degraded depending on the ambient lighting conditions.

Features:

• Battery saving auto-off switch.
  
• Power : 1 - AAA battery
  
• Size: 5-3/4 x 2-1/4 x 1-1/8" ( 15 x 6 x 2-3/4 cm)
  

The ZC RF Meter Detectors are similar to wideband receivers with signal-strength meters. They features very high sensitivity and broad bandwidths that span high frequency (HF), short wave (SW), VHF, UHF and microwave frequencies.

All RF signals within the bandwidth are detected. It does not matter if the detected signals are analog, digital, pulsed,
frequency hopping, spread spectrum or trunking. The ZC detectors sensitivity is greater than that of most spectrum
analyzers.

The ZC-180 and ZC-270 are especially suitable for detection of covert cameras and transmitting bugs. Their unique
sensitivity enables them to detect high frequncy devices (1.2GHz, 2.4GHz, 3.5GHz) from distances of greater than 25 feet.

The ZC Detectors have both LINEAR and LOGARITHMIC detection. In a close vicinity of a transmitting device (4-8 feet from a 10 milliwatt transmitter) the meter will be at full scale. Then, by switching to the logarithmic mode, the meter reading is reset to a lower level.

The ZC Meter Detector is also particularly useful for amateur radio operators, manufacturers of wireless and antenna products, utility companies and cell phone telecommunication providers. From the base of utility poles these products
detect and locate arcing power lines and insulators. They are also handy as RFI detectors and locators on the tops of
utility poles. 

You can remove the risk of counterfeit losses. This counter top device will enable your staff to check the authenticity of money in a matter of a few seconds. Now effective counterfeit protection is available.

The device helps to detect

• US and Canadian Counterfeit Bills
• Foreign Currency
• Travellers Cheques
• Major Bank Credit Cards
• Gift Certificates
• Passports
• Invisible Signatures and I.D. Markings
• Cheques
• Sensitive Documents

Millions of counterfeit bills circulate daily throughout the world. Everyone who accepts foreign currency becomes a target. The Counterfeit Detector works on most foreign currencies

• No batteries required
• Fits into pocket, purse or cash register
• Will test at least 3,000 bills

The Counterfeit Detector Pen contains a specially formulated chemical which detects fraudulent money instantly. By simply touching the tip of the pen to currency, a coloured mark will appear on the currency to indicate its legitimacy:

1. Pale Yellow dot indicates the currency is good
2. Black dot indicates the currency is suspect

The telephone encryption system attaches onto most cellular and land-line telephone handsets. It is designed to scramble your converstations over the telephone lines by using a unit on each end.

This tactical device will protect your conversations from simple methods of eavesdropping from wire taps or electronic bugs. The unit is is totally portable and can be used around the world on most telephones.

By programming a code of up to 16 digits, an algorithm is created that rolls the scrambling code up to 65536 times. This provides over seventeen hours of continued use before the pattern repeats.

IMPORTANT: 2 units are required to provide security over the telephone lines.

Specifications:

• Dimensions:  13.3cm x 5.1cm x 2cm (5.2" x 2" x 0.8")
• Weight:  113g (4oz)
• Battery Charger:  9 Vdx (500mA)
• Current Draw:  80mA
• Max. User Code 16 digits
• Operating Temperature -30C-40C (-22F - 104F)

The Universal Transmitter Locator is a high quality RF and Audio Detector.It detects any RF sources, tracking transmitters, wireless cameras and telephone transmitters.

You can actually hear the transmission in progress and pinpoint the precise location.

The IR probe can be used to locate infrared transmitters. The microwave probe will detect microwave transmitters and with the telephone line sensor all wire pairs on a telephone system can be checked to determine if it is clear.

Specifications:

• Rapid spectrum coverage from 200Hz to 3.5 GHz
• Sensitivity over -70dBm
• Powered by one 9-Volt battery
• 3 main modes:

  Full RF band test
  Full RF band test + power test
  Audio test

Accessories:

Microwave antenna
Infrared sensor
Telephone line sensor
Headset

The response modes of the Body Mic Busters are also dual; they are the silent vibrator alert and the visual alert which consists of three light indicators LEDs. The Body Mic Buster will signal you to RF transmissions or to the presence of a tape recorder by vibrating silently and covertly. The separate indicator lights ("RF" or "Tape") will also activate, thus visually verifying the particular mode of surveillance that has been detected. (The remaining light indicator alerts you to a weak battery).

The new Mini Bug Detector is perfect for descreet bug detection. It is a professional and covert detector that can detect hidden video, audio or telephone transmitters.

Operates between 50MHz - 3GHz and its small size allows easy concealment in any pocket. LED light and audio alert for pinpointing any bug's location.

Comes complete with earphone and batteries.

Your personal electronic guard that will protect your telephone or fax line against any uninvited 'guests', bugs or other automatic eavesdropping equipment.

The improved third generation of the field-proven bug deactivator and privacy protector, now with even better protection provided by the revolutionary built-in high resolution and much enhanced accuracy. Digital read-out line status monitor providing instant and accurate observation and detection of even the smallest changes in the parameters of the protected line (changes which normally occur when a bug is installed on the line).

Model# XL 4500 Series II

The Model# XL 4500 Series II, 9 Element Yagi Antenna is a custom manufactured handheld unit incorporating a 9 element array for maximum signal reception and directivity.

Unlike general purpose antennas which simply receive signals, this unit allows for precise directional reception or transmission of signals. The antenna is specifically designed to work with most receivers, analyzers, scanners and detectors.

The XL 4500 Series II is ideal for electronic countermeasures, TSCM, EMC pre-compliance testing, EMI, medical, scientific, industrial and narrow beam transmission or reception applications.

Every XL 4500 Series II antenna is custom hand manufactured and individually tested to insure maximum performance.

Features

• Designed to work with most receivers, analyzers, scanners and detectors
• Highly directional
• 9 element high gain design
• 100% genuine copper elements
• 20 dBd gain over conventional antenna designs
• Lightweight, less than 16 oz.
• Isolated driven element
• 7 driver elements
• 10” reflector element for excellent spurious signal rejection
• Heavy duty construction
• Frequency spectrum 5 MHz to 5600 MHz
• Detachable heavy textured rubber handle
• 17.5” x 10.25” w/7” handle
• Includes 3’ extension cable
• Standard BNC connector
• Professional matte black finish
• Complete with comprehensive operations manual

Model# XL 3000

The Model# XL 3000 Wand Antenna is the industry standard for electronic countermeasures. It features a 27” telescoping chrome steel dipole antenna for broad spectrum reception. This handheld wand features a heavy rubber handle for secure grip and output is provided by a standard BNC connector. This broad spectrum antenna element can be extended or retracted to more closely match the desired frequency spectrum as well as adjustments for greater or lesser sensitivity. The antenna additionally provides for matching the polarization of the suspect transmitter.

The antenna’s omni-directional characteristics and broadband spectrum make this antenna ideal for a variety of applications, including TSCM, EMC, EMI, and various other medical, industrial and scientific applications.

Features

• Designed to work with most receivers, analyzers, scanners and detectors
• Omni-directional broadband reception
• Chrome telescoping dipole element
• Frequency spectrum of 5 MHz to 5500 MHz
• Heavy textured rubber handle for secure grip
• Includes 3’ extension cable
• Standard BNC connector
• Professional matte black finish
• Complete with comprehensive operations manual

Model# XL 4100

The Model# XL 4100 Dual Dipole Wand Antenna is a custom manufactured handheld unit incorporating a twin element array for maximum signal reception and directivity. It can be used as a semi-directional or omni-directional antenna. The unit features a heavy rubber handle grip for a secure hold. This antenna has substantially superior reception over standard single element designs.

The dual elements allow for antenna rotation thereby providing various methods of reception and increasing transmitter detection capability. The elements can be extended or retracted to more closely match the desired frequency and will also provide for an increase or decrease in antenna sensitivity. This antenna additionally provides for matching the polarization of the transmitter antenna.

Features

• Designed to work with most receivers, analyzers, scanners and detectors
• Twin chrome 40”elements for maximum signal reception
• Telescoping elements for frequency and sensitivity selection
• Semi or omni-directional
• Element friction adjustment screws
• Frequency spectrum of 5 MHz to 5500 MHz
• Heavy textured rubber handle for secure grip
• Includes attached 36” cable
• Standard “F” type connector
• Professional matte black finish
• Complete with comprehensive operations manual

© SPY STUFF™ 1995-2008 - ALL RIGHTS RESERVED

Web design and graphics by
CompuScribe Technical Communications